お問い合わせ

  • TOP
  • 【LL-OFY-Q Instructions】

【LL-OFY-Q Instructions】

luorescent Leak Detection Dyes (P/N:LL-OFY-Q) For Use in Industrial Oil-Based Fluid Systems

Quickly finds leaks in enclosed circulating systems containing fluids that are miscible with oil (petroleum or synthetic-based), fuel, lubricant or similar fluids. For best leak detection results, use OIL FINDER YELLOW DYE (P/N:LL-OFY-Q) with a leak detection flashlight in low-light conditions.

READ CAUTIONS AND DIRECTIONS BEFORE USING.
FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY

DIRECTIONS:

1.Add the appropriate OIL FINDER YELLOW DYE (P/N:LL-OFY-Q)

to the suspect system. Begin with the recommended dilution ratios of dye to host fluid. More dye can be added to the system if leaks are not clearly visible.

Host Fluid1 oz dye (30 ml)
Light-colored hydraulic fluidper application
Dark or intensely blue8 gal (30 l)
hydraulic fluid4 gal (15 l)
Compressor oil4 gal (15 l)
Engine oil3 gal (11 l)
Gearbox oil1 gal (3.8 l)

NOTE:

• KEEP OUT OF REACH OF CHILDREN
• WASH THOROUGHLY AFTER HANDLING
• WIPE ALL SPILLS TO AVOID STAINS
• STORE IN A COOL PLACE AWAY FROM SUNLIGHT
• STORE IN CLIMATE CONTROLLED, DRY AREA DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE AND FEDERAL REGULATIONS

LeakLab Japan assume no liability for consequential or other damage resulting from the use or misuse of this product.

2.Run the system to allow the OIL FINDER YELLOW DYE
(P/N:LL-OFY-Q) to circulate thoroughly. The dye needs time to mix with the oil and circulate to all the leak sites. This period of time will vary greatly depending on the size of the system and the size of the leak. It could take anywhere from 5 to 10 minutes for small systems with large leaks, to several days for larger systems with smaller leaks.

3.Inspect all areas with a high intensity lamp. Be sure to use the fluorescence-enhancing glasses supplied with the lamp, especially when using a blue light lamp. In hard to reach areas, use a mirror to reflect the light, or wipe the obstructed area with a clean cloth, and then check for the fluorescence.
NOTE: For best results, use the lamp in low-light conditions.

4.OIL FINDER YELLOW DYE (P/N:LL-OFY-Q) can safely remain in the system, so you can check the repair without adding more dye.

5.After the leaks are repaired, clean the leak sites with GLO-AWAY™ PLUS dye cleaner or a shop cleaner.

6.Run the system again and reinspect with the lamp. No glow means all leaks have been fixed!

P/N: LL-OFY-Q

PRINTED IN LEAKLAB JAPAN


NSF Certified—OIL FINDER YELLOW (P/N:LL-OFY-Q) fluorescent dyes are registered to meet food-grade processing requirements for category codes HTX-2 and HX-2.

For product information and technical assistance, call us at Tel: 81(743)21-0005 Fax: 81(743)21-0005
in Japan website at https://leaklab-japan.com/

CONTACT US

お問い合わせ

あらゆる『漏れ』について
プロに無料相談